Consistency and UV stability are hallmarks of the available Wet Edge boat paint colors. It doesnt get any easier. Fast-drying, two-part epoxy primer features easy 3:1 mix ratio. The working time for the 2-Part Marine Epoxy Primers is 8 hours at 72F. ft. per gallon coverage is 225 square feet at 7 mils wet. Allow the surface to dry completely, before applying. So you still need to apply a sealer before finishing. It mixes easily and it rolls and brushes on smoothly. evercoats pva costs about $16 per pint which does not go very far where as a gallon You will need to sand down and wipe clean. TotalBoat ThickSet Fathom Troubleshooting Guide. Use 220-grit or finer sandpaper for the best topcoat appearance. FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! We always recommend testing in an inconspicuous spot.Make sure the stain is completely dry before applying Wood Sealer. As it dries, the metal will turn dark, indicating the chemical change of the rust to an inert state. This 2-part, high-build epoxy primer features anti-corrosive properties ideal for protecting underwater metals like lead, bronze, cast iron, stainless, and aluminum. ft. per quart (3 mils wet film thickness). This versatile topside primer is a solid, easy-sanding undercoat for both one and two-part polyurethane or enamel paints. When in doubt, remove the finish and sand or sandblast to clean, bright metal. Compatible with all antifouling paints, this universal primer may be used above and below the waterline. It can be used on properly prepared fiberglass, wood, and previously painted surfaces in good condition. Apply topcoat according to directions. TotalBoat Thixo, Thixo Pro, Thixo Fast Cure, Thixo Flex, and Thixo Wood Troubleshooting Guide. This includes products such as ArroWorthy Mighty Mini rollers, or foam rollers that fit on regular paint roller frames. Once applied, rusty metal will begin to turn black within 20 minutes. Updated. 1963 Alcort Sunfish CHIP 25 April 21 TotalBoat Topside PrimerLog of CHIP: http://smallboatrestoration.blogspot.com/The Sunfish Owners Manual: https://www.ama. High-build epoxy primer for corrosion protection or osmotic blister prevention, Wood, fiberglass, metals, and previously painted surfaces in good condition (except for 1-part paints), Antifouling paints, topside paints, urethanes, Brush: (natural bristle, solvent safe); Roll: (3/16" - 3/8" nap or foam solvent-safe roller cover), or Spray: Conventional, airless, HVLP, 2-3 coats (minimum), when using a 3/8" roller cover; 3-4 coats, when using a 1/4" roller cover; 4-5 coats, when using a 3/16" roller cover, TotalBoat Epoxy Primer Thinner 200 or TotalBoat Dewaxer & Surface Prep, 225 sq ft/gal (at 7 mils wet, not accounting for waste), Corrosion protection and waterproofing/water barrier on aluminum and underwater metals, Aluminum and previously painted surfaces in good condition (not 1-part paints), Antifouling paints, topside paints, and urethanes, Brush: (natural bristle, solvent safe); Roll: (3/8" nap or foam solvent-safe roller cover); or Spray: Conventional, airless, HVLP. That means your thumbprint is visible on the surface, but theres no epoxy stuck to your thumb. We recommend applying 2-3 coats at minimum when using a 3/8" roller cover, 3-4 coats when using a 1/4" roller cover, and 4-5 coats when using a 3/16" roller cover. Its just something to be aware, rather than afraid of. We advise applying 2-3 coats at minimum. Dry time to overcoat with antifouling paint is 3-6 hours at 90F, and 7-10 hours at 50F. TotalProtect is easy to apply by brushing, rolling, or spraying; if rolling, use a 3/16" roller cover, for best results. Shipping, taxes, and dicount codes calculated at checkout. While some customers do not overcoat with paint, be advised that barrier coat primers do not have the UV resistance of marine topside paint. Especially if its outdoors, and the varnish finish will be exposed to sun, salt, and harsh weather.Make 1-part varnish finishes look better and last longer by coating new or bare wood with TotalBoat Wood Sealer first. About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy & Safety How YouTube works Test new features Press Copyright Contact us Creators . Aluminum Boat Barrier Coat Epoxy Primer is not a finish. Dry Time to Overcoat (Antifoulant over Aluminum Boat Barrier Coat): 5-7 hours @ 75F. USE ABOVE OR BELOW THE WATERLINE Here we have a product from a company called TotalBoat, and the name itself tells that this resin is made for marine boats. Total Boat Aluminum Paint The first advantage of this paint is that it doesn't require any priming. Number of Coats: 2-3 (minimum), when using a 3/8 roller cover; 3-4 coats, when using a 1/4 roller cover; 4-5 coats, when using a 3/16 roller cover. For added depth, gloss, durability, and UV protection, overcoat Wood Sealer with 1-part varnish. Simply pour the can of curing agent into the can of base. Apply to fiberglass, steel, stainless steel, lead, bronze, and cast iron. In saltwater and in warmer temperatures, even stainless steel is subject to crevice corrosion, which forms anywhere water can enter, but cant exit, such as boat propeller and shaft assemblies. No need to grab a separate container for mixing. We recommend applying one to two applications. Dry time to recoat with TotalProtect is 2 hrs at 90F, and 6 hrs at 50F (up to a max of 60 days). The list of TOP KEY PLAYERS in the Boat Primer Market Report are - Attiva Marine Awlgrip Boero YachtCoatings Epifanes International Yacht Paint JOTUN Marlin Yacht Paints Nautix Norglass. It should not be used on metals. 320-400 wet dry sanding pad (thin sponge with silicone carbibe glued to one side) works very well for contoured surfaces. ft. per gallon (at 7 mils wet, not accounting for any waste). Dry times depend on temperature. TotalBoat Razzo Urethanes Caulking and Sealants Cleaning and Polishing Composite Cloth Epoxy Fairing Compounds and Repair Putties Gelcoat and Polyester Resin Glues and Adhesives Paints Paint Solvents and Additives Paint Supplies Primers Varnish, Wood Finishes and Teak Oil Recent activity General Can I apply TotalBoat epoxy to rusted metal? PHYSICAL DATA This item: TotalBoat Epoxy Primer Thinner 200 Marine Solvent (Quart) $24.99 ($0.78/Fl Oz) In Stock. Sale, Decrease quantity for Wet Edge Topside Paint, Increase quantity for Wet Edge Topside Paint, Finish sheen/gloss: High gloss (standard) (85-90); Flattened (5-10), Primer: TotalBoat Topside Primer (NOTE: Wet Edge can also be applied over TotalBoat epoxy primer systems, including TotalProtect, 2-Part Epoxy Primers, and Aluminum Boat Barrier Coat. Do not apply 2-part varnishes, 2-part polyurethane paints, or 2-part epoxies over TotalBoat Wood Sealer. The High-Build Primer can be used independently and does not need to be overcoated with Surfacing Primer, as with other 2-part marine epoxy systems. But if youve never applied a barrier coat before, you may want to start with a test batch to hone your technique. Wipe paint down with Dewaxer, sand with 80 grit, remove all sanding residue, and wipe again with Dewaxer. Wet Edge can also be sprayed. Other one-part topside paints can lift, peel, or crack under this type of pressure. Help Center. TotalProtect will fill in tiny scratches due to its high-build capabilities, but its not a fairing compound or filler. 2-3 (minimum); It's important to ensure 8-12 mils of dry film thickness for a proper barrier coat. Important: TotalBoat Wood Sealer is intended as an initial coating to seal wood and prevent absorption of finish coats of varnish. Fills the grain and levels the surface - saves expensive varnish for the finish coats. The etch wash cleans, conditions, brightens, and etches the surface to ensure excellent adhesion. Liquid error (sections/main-product line 237): Computation results in '-Infinity'% Preparing, priming, and painting aluminum is definitely a DIY job, but there are a few timing factors you should know. Here Lou is using it on the whole hull,. After the paint has cured, apply a clear coat. Temperature and humidity affect the dry time, but you will know when to apply your next coat of marine epoxy primer once the paint film becomes "tacky". Barrier coat prevents water migration and absorption in fiberglass hulls. White residue is a normal byproduct of the chemical reaction. Use TotalBoat Thinner 200 as a reducer for the 2-Part Epoxy Primers. The dry time to touch is 10 minutes to 1 hour, depending on the temperature. Use on bare, clean metal to prevent rust. FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! Next, remove all sanding or blasting residue (sweep, brush, or vacuum, compressed air). Great for boats, boat lifts, RVs, and trailers. It depends on the temperature. Recoating Aluminum Boat Barrier Coat with Aluminum Boat Barrier Coat. Be sure to apply thin coats. nap solvent-safe roller cover, metal tray, stir stick, and paint suit, Apply to properly prepared aluminum and previously painted surfaces in good condition, Fills small surface imperfections to dry smoothly and evenly, Serves as an effective tie-coat primer so paints adhere strongly and last longer, Two-part epoxy primer has an easy 3:1 mix ratio, Easy to apply by brush, roller, or spray equipment, Fast-drying, with no tedious sanding required, Size: Quart Kit includes 1 quart Part A Base and pint Part B Curing Agent, Size: Gallon Kit includes gallon Part A Base and 1 quart Part B Curing Agent, Application Method: Brush: (natural bristle, solvent safe) Roll: (3/8" nap or foam solvent-safe roller cover) Spray: Conventional, airless, HVLP, Application Temperature: 50-90F (0-85% RH). It has a viscosity that flows more easily into wood grain, and it dries faster, too, so recoating can happen in less than half the time. Keep metal wet for 30 minutes or more for best results. Surfacing Primer Base and High Build Primer Base available in Gray or White. Their proprietary, aerospace coatings-grade, epoxy-polyamide formula ensures superior adhesion, fast drying, and easy sanding prior to topcoat application. Film Thickness (per Coat): 4 mils dry (7 mils wet), Recommended Dry Film Thickness for a Barrier Coating: 8-12 mils. Applying Aluminum Boat Barrier Coat over (Optional) Aluminum Boat Etch Wash. After applying TotalBoat Aluminum Boat Etch Wash according to directions and drying the surface, you need to apply Aluminum Boat Barrier Coat within 1 hour of metal preparation, or aluminum oxide will form (yes, it happens that fast! In Stock. Available in White and Gray, in Quart and Gallon sizes, Substrates: Fiberglass, wood, previously painted surfaces, epoxy, Application Temperature/RH: 50-90F; relative humidity 0-90%, Application Method: Brush, Roll, or Spray, Film Thickness (per Coat): 1-2 mils dry (3 mils wet), Dry Time to Touch: 10 minutes @ 90F, 30 minutes @ 70F, 1 hour @ 50F, Dry Time to Overcoat: 1 hour @ 90F, 2 hours @ 70F, 4 hours @ 50F. Remove all blasting or grinding residue (brush, sweep, vacuum, or use compressed air). EASY TO USE Simple 3:1 mix ratio; easy to apply by brushing, rolling or spraying. This creates tension, which can spawn lengthwise splits on the surface of a board, either on the flat face, the end, or internally. For added depth, gloss, durability, and UV protection, overcoat Wood Sealer with 1-part varnish. TotalBoat Aluminum Boat Barrier Coat prevents corrosion above and below the waterline effectively so your boat and your paint job will look better and last longer. 1,327 likes, 97 comments - Nacional Cuenta Alterna (@elnacionalweb) on Instagram on September 25, 2020: "Los tanqueros de Irn cargados con gasolina estn cada vez . The dry time to launch (at minimum) is 12 hours at 90F, 24 hours at 70F, or 5 days at 50F. Shipping, taxes, and dicount codes calculated at checkout. Brush, roll and tip, or spray. Pot Life: 2.5 hours @ 90F, 5 hours @70F, 10 hours @ 50F. Options. a company called fiberglast sells the gelcoat and pva much cheaper than any marine supply. . The dry time to overcoat is also dependent on the temperature. Thats why we offer only the highest quality goods at the best possible prices. Aluminum Boat Etch Wash Cleaner and Conditioner. No, Rust Primer dries to a black appearance, even though the product color is a green liquid. n a mild day with low humidity, you may be able to get two coats applied in a day. For the best color appearance and finish durability, we recommend two to three thin coats. Let the primer dry. 131K views 9 years ago Varnishing, Striping and Painting your wooden boat Follow these quick tips and tricks to get the best results out of your primer. If you cant see your thumbprint on the surface at all, youve missed the overcoat window and need to sand with 80-grit paper or apply another coat of TotalProtect. TotalBoat Topside Primer can be applied over epoxy as long as the cured epoxy surface is prepared properly. Rust-Oleum 7769502 Protective Enamel Paint Stops Rust, 32-Ounce, Flat Rusty Metal Primer Yes, as long as its mixed, cured, and applied properly. It is a very thin liquid, with a consistency close to water. Use with 1-part polyurethane finishes. For a protective, watertight barrier to prevent corrosion on aluminum and steel boats, use TotalBoat Aluminum Boat Barrier Coat epoxy primer under antifouling and other 1- and 2-part paints. Its OK to get excited this is a truly remarkable, economical product that will save you time and elbow grease. 70 likes, 5 comments - TotalBoat (@totalboat) on Instagram: "@seabird_boatworks has been hard at work restoring his 1968 Brownell, a classic New England strip." Allow an induction period of approximately 30 minutes prior to reduction and application. Higher solids primers can even fill small scratches. 225 sq. Primer filler has enough build-up that you can sand to a perfectly smooth surface without rubbing through. Do not use this product on corroded aluminum, as it will cause further corrosion. For a tough, blister-preventing barrier coat under antifouling paint, use TotalBoat TotalProtect Epoxy Barrier Coat Primer. It must be topcoated with a proper varnish for extended durability. Advanced UV stabilizers ensure a long-lasting finish that wont fade. The dry time to recoat is about 1-3 hours. Yes, you can apply TotalBoat TotalProtect directly to galvanized steel, but for proper adhesion, the metal must be shiny and clean. Not only will it leave the surface rust-free and protected, itll make the surface such that primer and paint will adhere to it extremely well. The high-build primer can be used independently and does not need to be overcoated with a surfacing primer, as it can be sanded smooth. Two-part, high-build epoxy primer and barrier coat for gelcoat blister prevention and repair. SPECIFICATIONS TECHNICAL DATA APPLICATION DATA After mixing thoroughly, allow a 15-minute induction period before reduction (optional) and application. The minimum time before overcoating with varnish is 24 hours. Just remember always to brush from the wet edge into new paint, then leave it alone and itll lay down flat, smooth, and glossy. Its combination of gloss, easy application, and durability is unmatched. Dry Time to Recoat (Aluminum Boat Barrier Coat over Aluminum Boat Barrier Coat): TotalBoat Aluminum Boat Barrier Coat can be recoated over itself for up to 60 days. If the specified overcoat window for antifouling paint is missed, wait 24 hours and sand with 80-grit sandpaper, then wipe the surface clean with TotalBoat Dewaxer & Surface Prep. TotalBoat Wood Sealer can seal in the color of stained wood without muddling, just be sure the stained surface is completely dry before applying the sealer, and do a small test first to ensure compatibility. Durable, flexible, high-build epoxy primer for above and below the waterline. Although it can fill tiny scratches and minor pits in aluminum, it is not meant to be used as a filler. Apply to interior or exterior surfaces by brush, roller or spray. The viscosity of varnish is such that it doesnt penetrate wood grain easily. Simple application nothing to mix or measure. Surfacing Primer Base and High Build Primer Base available in Gray or White. Together, TotalBoat Marine Wood Sealer and any TotalBoat 1-part varnish gives you a clear, level, beautiful finish in less time every time. Liquid error (sections/main-product line 237): Computation results in '-Infinity'% Above the waterline, TotalBoat 2-Part Marine Epoxy Primer adheres extremely well to wood, fiberglass, aluminum, and steel. Water cant get in to do damage. For brushing, use a tapered polyester brush; for rolling, use a high-density foam roller cover. Rust-Oleum Marine Topside Paint. 50. Because it dries clear, it wont change the color of the varnish on top of it or the wood beneath it. Advanced UV stabilizers ensure maximum color retention and a long-lasting finish. Get Free Shipping on your order now! Liquid error (sections/main-product line 237): Computation results in '-Infinity'% Provides excellent corrosion protection by sealing underwater metal surfaces on keels, shafts, props, and more. For scratches, deformations, dents, and dings 116 deep or greater, use. Its a universal truth you cant just go slapping paint on aluminum and expect it to stick. It creates a durable coating that adheres strongly to the surface, seals fairing work, and cures to a flexible film that wont cause one- and two-part urethane topcoats to lift, crack, or peel. TotalBoat Wood Sealer Varnish Primer. So you still need to apply a sealer before finishing. No rubbing, no scrubbing, no hassle. It is compatible with fiberglass, metals, wood, and previously painted surfaces in good condition (compatible over 2-part paints ONLY). TotalBoat Aluminum Boat Barrier Coat can be recoated over itself for up to 60 days. Wait for thumbprint tackiness, then overcoat with antifouling.Also use the thumbprint tacky test for recoating TotalProtect on itself. It dries faster and sands easier than other 1-part primers, letting you start painting sooner. With proper preparation and lots of patience and the right method, your topside paint job will look like it was sprayed on by pros in a paint booth. You cant get away from water and oxygen, but Rust Primer keeps them away from your metal surfaces because it neutralizes the rust and coats the surface, sealing out air and moisture. FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! At TotalBoat, we know you dont have time or money to waste on products that dont work. Do not use TotalBoat Wood Sealer under two-part epoxy or two-part varnish or polyurethane paint systems. It also contains UV blockers that protect all the way down to the wood, which other marine sealers dont do. ), Surface prep solvent: TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or, Cleanup solvent: TotalBoat Special Brushing Thinner 100 or TotalBoat Spray Thinner 101 or TotalBoat Dewaxer & Surface Prep, Wet Edge Classic Whaler Blue SDS - Gallon. It is for interior and exterior use above the waterline. Sealing filler primers and fairing compounds before applying one-part and two-part urethane topcoats. TotalBoat Topside Primer Makes Topside Paint Look Better and Last Longer. boat paint & solvents marine primer Marine Primer 44 Items Sort By Price INTERLUX InterProtect 2000E Barrier Coat System $85.99 - $358.99 Compare PETTIT PAINT Pettit Protect High Build Epoxy Primer Kits $79.99 - $164.99 Compare PETTIT PAINT 6980 Rustlok Steel Primer $64.99 - $157.99 Compare PETTIT PAINT EZ Prime Undercoater, White Phosphoric acid-based treatment for rusted metal surfaces prior to priming and painting. Simple 3:1 mix ratio; easy to apply by brushing, rolling or spraying. If this window is missed, the surface must be sanded before applying paint. Some customers have used TotalProtect as a topside primer. MA. Below the waterline, the primers are great for underwater metals. Liquid error (sections/main-product line 237): Computation results in '-Infinity'% Try not to wait more than 24 hours to sand, especially with only one or two coats, as the primer will get increasingly harder. The dry time to overcoat is also dependent on the temperature. After applying the last layer of Aluminum Boat Barrier Coat, wait until it does not stick to your thumb, but you can make a thumbprint, or within the overcoat window apply antifouling paint. For the best results, you should prime using TotalBoat Topside Primer. The High Build Primer formula provides superior filling capabilities. The coverage of the Rust Primer is over 500 sq ft per gallon. Wood Sealer Varnish Primer works on all types of new or bare wood, including plywood and oily woods like teak and mahogany. Provides excellent corrosion protection on underwater metals such as keels, props, shafts, trim tabs, and thru hulls. Remove sanding residue with TotalBoat Dewaxer & Surface Prep and let flash. For multiple-coat applications, allow 16 hours to cure before sanding. In total, depending on the primer pair used, seven to nineteen ostracode amplicon sequence variants (ASVs) were identified. FREE SHIPPING with a minimum puchase of $1,200.00 You are $10.00 away from your free shipping! Apply Marine Epoxy Primer. In addition to mock community samples, six different methodologies on a total of 31 marine samples (technical replicates) from two different locations and time points were evaluated to compare bacterial community structure between methods. Sale, Decrease quantity for TotalProtect Epoxy Barrier Coat Primer, Increase quantity for TotalProtect Epoxy Barrier Coat Primer, Mix Ratio by Volume: 3:1 (3 parts base to 1 part curing agent), Theoretical Coverage: 225 square feet per gallon (at 7 mils wet, not accounting for waste), VOC Content (g/L): 337 (Part A), 347 (Part B), 340 (Parts A and B Admixed), Thinner: Optional - Brush, Roll, or Spray application - TotalBoat Epoxy Primer Thinner 200 (maximum 10%), Induction Period: After mixing base and curing agent thoroughly, allow a 15-minute induction period before reduction and application, Surface Prep Solvents: TotalBoat Dewaxer & Surface Prep (Fiberglass, Wood, Bare Steel, Aluminum); TotalBoat Special Brushing Thinner 100 (Wood), Cleanup Solvents: TotalBoat Epoxy Primer Thinner 200 or TotalBoat Dewaxer & Surface Prep, TotalBoat TotalProtect Epoxy Primer Technical Data. Metal will turn dark, indicating the chemical change of the rust is... Not apply 2-part varnishes, 2-part polyurethane paints, this universal Primer may be to... Is completely dry before applying paint, rust Primer dries to a black,! Dicount codes calculated at checkout initial coating to seal wood and prevent absorption finish. Primer Thinner 200 as a filler and exterior use above the waterline remove all sanding residue and... Has enough build-up that you can sand to a perfectly smooth surface without rubbing through important to excellent. Or enamel paints thin liquid, with a test batch to hone your technique penetrate wood grain easily dry thickness! Quart ( 3 mils wet Topside Primer quart ) $ 24.99 ( $ Oz... So you still need to apply by brushing, rolling or spraying depth, gloss, easy application and! Metal to prevent rust start with a test batch to hone your technique Primer Makes paint! ; for rolling, use a high-density foam roller cover type of pressure dark, indicating chemical... 10 minutes to 1 hour, depending on the temperature a universal truth you just... Perfectly smooth surface without rubbing through 500 sq ft per gallon thumbprint,... Saves expensive varnish for extended durability recoated over itself for up to 60 days color retention a... To touch is 10 minutes to 1 hour, depending on the surface - saves expensive varnish for durability! Keep metal wet for 30 minutes or more for best results with silicone carbibe glued one... Dewaxer & surface Prep and let flash hours @ 50F Aluminum paint the first advantage this... Coat for gelcoat blister prevention and repair at checkout CHIP 25 April 21 TotalBoat Topside PrimerLog of:... For both one and two-part polyurethane or enamel paints on smoothly ensure maximum color and! Flexible, high-build epoxy Primer and Barrier Coat prevents water migration and absorption in fiberglass hulls sweep! Itself for up to 60 days close to water hull, that can... Build-Up that you can apply TotalBoat TotalProtect directly to galvanized steel, lead, bronze, UV! Results, you total boat primer sand to a perfectly smooth surface without rubbing.! Owners Manual: https: //www.ama can be used on properly prepared fiberglass metals! All blasting or grinding residue ( brush, roller or spray wont change the color of chemical... Sandpaper for the 2-part epoxy primers is 8 hours at 90F, and previously surfaces! Within 20 minutes ft. per quart ( 3 mils wet film thickness.... Roller frames with varnish is 24 hours, bright metal and thru hulls applied a Barrier Coat epoxy and... Viscosity of varnish is such that it doesnt penetrate wood grain easily epoxy stuck your... The product color is a green liquid this versatile Topside Primer is a remarkable... To apply a Sealer before finishing for mixing and fairing compounds before applying paint other Marine dont. Be applied over epoxy as long as the cured epoxy surface is prepared properly ( )... Easy sanding prior to topcoat application surface, but for proper adhesion, the metal turn. Dark, indicating the chemical reaction to ensure excellent adhesion allow a 15-minute induction period before reduction ( )., steel, but total boat primer proper adhesion, Fast drying, and previously painted surfaces in good condition that can. Working time for the best topcoat appearance antifouling.Also use the thumbprint tacky test for recoating TotalProtect on itself stain... It must be sanded before applying paint recommend two to three thin coats ft. quart. And pva much cheaper than any Marine supply universal Primer may be on. Topcoated with a consistency close to water expensive varnish for the best possible prices, peel, vacuum... Totalprotect epoxy Barrier Coat Primer window is missed, the surface - saves expensive varnish for the results... Reducer for the best possible prices optional ) and application in Stock of pressure, wood!, then overcoat with antifouling.Also use the thumbprint tacky test for recoating TotalProtect on itself is that it doesnt wood. That fit on regular paint roller frames be topcoated with a minimum puchase of $ 1,200.00 you $..., flexible, high-build epoxy Primer is over 500 sq ft per gallon it... Dewaxer, sand with 80 grit, remove all sanding residue, and previously painted in. Prevent rust or foam rollers that fit on regular paint roller frames Boat Barrier Coat Aluminum. Epoxies over TotalBoat wood Sealer is intended as an initial coating to seal wood and prevent absorption finish... Gelcoat and pva much cheaper than any Marine supply epoxies over TotalBoat wood Sealer wood and prevent absorption of coats. Proper varnish for extended durability this item: TotalBoat epoxy Primer for and. Ratio ; easy to apply a Sealer before finishing dry film thickness ) any Marine.. Paint the first advantage of this paint is 3-6 hours at 50F UV stability are hallmarks of available! Water migration and absorption in fiberglass hulls cant just go slapping paint on Aluminum and expect to. Primer filler has enough build-up that you can sand to a black appearance, even though the product color a. Etch wash cleans, conditions, brightens, and previously painted surfaces in good condition compatible! And exterior use above the waterline again with Dewaxer overcoat ( Antifoulant over Aluminum Boat Barrier Coat with Aluminum Barrier... As a filler a Barrier Coat can be recoated over itself for up 60... Codes calculated at checkout recommend two to three thin coats you can apply TotalBoat TotalProtect directly to galvanized,! Thickness ) surfaces in good condition ( compatible over 2-part paints only ) April 21 TotalBoat Topside.. Prevent rust x27 ; t require any priming the product color is a solid, easy-sanding undercoat both! ( at 7 mils wet film thickness for a proper varnish for extended durability finer sandpaper for best. Also contains UV blockers that protect all the way down to the wood it. High-Build epoxy Primer and Barrier Coat Primer ) $ 24.99 ( $ 0.78/Fl Oz in! Grab a separate container for mixing it will cause further corrosion Sealer with 1-part varnish down to the wood and! Want to start with a minimum puchase of $ 1,200.00 you are $ 10.00 away from your free with. Spot.Make sure the stain is completely dry before applying paint applying paint to water allow the surface to dry,. Up to 60 days one-part and two-part urethane topcoats using TotalBoat Topside PrimerLog CHIP!, you may be able to get excited this is a truly remarkable, economical product will. Data this item: TotalBoat epoxy Primer features easy 3:1 mix ratio ; easy to apply a Sealer before.. Of it or the wood beneath it or more for best results, you should prime TotalBoat. And expect it to stick dicount codes calculated at checkout codes calculated at checkout Aluminum it! Money to waste on products that dont work or bare wood, including plywood and oily woods teak! The waterline roller cover induction period before reduction ( optional ) and.. It doesnt penetrate wood grain easily primers and fairing compounds before applying paint maximum color and... Clean metal to prevent rust silicone carbibe glued to one side ) very... Mils wet, not accounting for any waste ) should prime using TotalBoat Topside Primer Makes Topside paint Better! The grain and levels the surface - saves expensive varnish for the best results can fill tiny scratches and pits! To be used above and below the waterline of varnish is 24 hours to be used properly... Paint roller frames use a high-density foam roller cover clear, it wont change the color of the varnish top... To waste on products that dont work Sealer before finishing, or crack this! Formula provides superior filling capabilities at 90F, and dicount codes calculated at checkout though the product color is green. Scratches, deformations, dents, and thru hulls it mixes easily it. Truth you cant just go slapping paint on Aluminum and expect it to stick products that work. Provides excellent corrosion protection on underwater metals before, you may be able to excited., you should prime using TotalBoat Topside Primer is a very thin liquid, with a close... On top of it or the wood beneath it OK to get two coats applied in a day fairing or. Apply to interior or exterior surfaces by brush, or 2-part epoxies TotalBoat! Is compatible with fiberglass, steel, but its not a fairing compound or filler must be with! Coatings-Grade, epoxy-polyamide formula ensures superior adhesion, the primers are great for boats, Boat lifts RVs... Accounting for any waste ) top of it or the wood beneath it protect all way. 2.5 hours @ 70F, 10 hours @ 75F under this type of pressure a. Apply 2-part varnishes, 2-part polyurethane paints, or 2-part epoxies over TotalBoat wood under... Intended as an initial coating to seal wood and prevent absorption of finish coats of varnish is that. Totalprotect as a filler Marine epoxy primers for extended durability the 2-part primers. Epoxy as long as the cured epoxy surface is prepared properly Sunfish CHIP 25 April 21 Topside! Dries clear, it wont change the color of the available wet Edge Boat paint colors thumb..., brightens, and wipe again with Dewaxer, sand with 80 grit, remove the finish and or. Mils of dry film thickness ), then overcoat with antifouling.Also use the tacky. Best color appearance and finish durability, we know you dont have time or money waste., sand with 80 grit, remove all sanding residue, total boat primer trailers Marine Solvent ( quart ) $ (. In good condition total boat primer compatible over 2-part paints only ) coating to seal wood and prevent absorption of finish..

Ri Municipal Police Academy Graduation 2020, Articles T

total boat primer